God Mode in Windows

God Mode is a special folder that gives you access to an array of system tools, including Administrative Tools (Disk Management, Event Viewer, Services, Task Scheduler, etc) and a host of functions that you would otherwise need the Control Panel to access. The beauty of the God Mode folder is that they are all listed together rather than in separate tabs.

To create the God Mode folder:

  1. Make sure you’re logged is an admin user.
  2. Right-click on the desktop, select “New” and click “Folder”.
  3. Now the important step. Rename the folder as “God Mode.{ED7BA470-8E54-465E-825C-99712043E01C}” (without the quotes).
    You can replace “God Mode” with another name, but everything that follows must remain (e.g. “Admin stuff.{ED7BA470-8E54-465E-825C-99712043E01C}”)
  4. If you now double-click the folder, you will see a list of tools covering more than 200 functions.
  5. Enjoy!

 

 

 

 

Format Thyself

I have a laptop with Windows 10 on the single drive. Because I was lending it to a friend, I needed to clear the drive so they could install their software. I backed up an image of the drive, and was ready to reformat it. Clearly, I couldn’t do that from within Windows.

The first step was to make sure I had a Windows repair disk. I did, on a USB complete with system files.

The next step was to change the boot sequence so that it tried the USB device before the hard disk.

Then it was just a matter of restarting the system.

Once the USB had loaded the repair/recovery screen, I chose Troubleshooting from the menu:

Windows 10 Repair/Recovery screen

From the Troubleshoot menu I selected Advanced Options, followed by Command Prompt.

I entered the format command: format C: /fs:NTFS

(NOTE: If the C: drive has a volume name, e.g. OS, it will prompt for this.)

The reformat didn’t take long, as it resets the indexes rather than wiping the drive. In other words, using the right tool, the data is recoverable, but I knew that wasn’t going to happen.